Wholesale MCX01 Series Autotransformer Step-Down Starting Cabinet Supplier, Companies

This product features a cabinet-type structure, composed of components including an autotransformer (with a thermal protector), AC contactors, integrated protectors, and time relays. Models with a power rating of 75kW and below adopt an automatic control mode, while models of 90kW and above support both manual and automatic control modes, which can be switched via a changeover switch. The time relay is adjustable, allowing users to freely set the starting time. Ammeters and voltmeters are installed on the cabinet door to directly display the operating status of the starter cabinet, making operation more intuitive and convenient for users.

Product Description

Type & Meaning

MCX01-4
1 Enterprise identification code
2 Starter cabinet
3 Autotransformer
4 Design serial number
5 Rated power of the controlled motor (kW)

Application Description

The MCX01 series autotransformer reduced-voltage starter cabinet is designed for use with three-phase squirrel-cage induction motors with rated power ranging from 15kW to 315kW, operating at AC 50Hz/380V. It is intended for non-frequent autotransformer reduced-voltage starting applications. By leveraging the voltage-reducing characteristics of the autotransformer, the starter effectively limits the motor's inrush starting current, thereby significantly mitigating the impact of the motor starting process on the power distribution network and protecting both the motor and the grid from adverse effects caused by excessive starting currents.

Product Display

Operating and Service Conditions

Ambient Temperature: The minimum ambient temperature must be greater than -5°C, while the maximum ambient temperature should not exceed +40°C. Additionally, the average daily temperature must remain below +35°C to prevent overheating or performance degradation.
Altitude: The equipment is intended for use at altitudes not exceeding 2000 meters above sea level, as higher elevations can affect cooling efficiency and electrical insulation properties.
Humidity: The average monthly relative humidity must not exceed 90%, measured at an average ambient temperature of 20°C. This prevents condensation and moisture-related damage to internal components.

Technical Parameters

Specifications Controlled Motor Power (kW) Maximum Operating Current (A) Inductive Current Ratio (K) Full Protection Environmental Current (A) Total Maximum Starting Time (s)
MCX01-15 15 29 100/5 29 60
MCX01-18.5 18.5 36 100/5 36
MCX01-22 22 42 100/5 42
MCX01-30 30 57 100/5 57
MCX01-40 40 80 200/5 80
MCX01-55 55 103 200/5 103
MCX01-75 75 140 200/5 140
MCX01-90 90 167 300/5 2.8 80
MCX01-115 110 207 300/5 3.5
MCX01-135 132 248 400/5 3.1
MCX01-160 160 300 400/5 3.8
MCX01-190 190 367 600/5 3.1 100
MCX01-225 220 404 600/5 3.4
MCX01-260 250 459 600/5 3.8
MCX01-280 280 514 800/5 3.2
MCX01-315 315 579 800/5 3.6

Outline and Installation Dimensions

Specifications Overall Dimensions (mm) Installation Dimensions (mm)
MCX01-15-30 400×700×300 365×115
MCX01-40-75 500×1005×320 470×120
MCX01-90-115 550×1110×430 490×250
MCX01-135-190 600×1300×490 520×320
MCX01-220-315 700×1700×580 640×410

Frequently Asked Questions (FAQ)

What is the primary function of the MCX01 starter cabinet?

The MCX01 is designed for three-phase squirrel-cage induction motors to reduce the starting voltage via an autotransformer, lowering inrush current and preventing voltage drops and grid disturbance.

What motor power ratings are compatible with the MCX01 series?

The series covers controlled motor capacities ranging from 15kW up to 315kW, operating under standard 3-phase AC 50Hz/380V supply.

What is the allowable operating temperature range?

The ambient operating temperature should be maintained between -5°C and +40°C, with the daily average remaining below +35°C to avoid overheating.

What is the maximum starting duration for these cabinets?

The allowable total maximum starting time varies by model capacity: up to 60 seconds for 15–75kW, 80 seconds for 90–160kW, and up to 100 seconds for 190–315kW models.

Can this equipment be installed at high-altitude locations?

Yes, the standard equipment is rated for operation at altitudes up to 2000 meters above sea level without degrading electrical performance and cooling.

Related Products