High-Quality High-Performance HL30-100 Miniature Disconnect Switch 1-4P 6-100A Suppliers, Supplier

Type Designation

1	Disconnector (Isolating Switch)
2	Design Serial Number
3	Frame Size Rated Current (A)
4	Number of Poles (1, 2, 3, 4)

Note: This product is an isolating switch, which only has the function of connecting and disconnecting power, and does not have protective functions.

Product Display

Environmental Conditions

• 1
  Ambient Air Temperature: +5℃ to +40℃, with an average temperature not exceeding +35℃ over 24 hours.
• 2
  Altitude: Not exceeding 2000 meters.
• 3
  Relative Humidity: Not exceeding 50% at +40℃. The average monthly relative humidity of the wettest month does not exceed 90%.
• 4
  Pollution Degree: 2
• 5
  Utilization Category: AC-22A
• 6
  Installation Category: II, III
• 7
  Mounting Method: Mounted on TH35-7.5 standard steel mounting rail. The inclination of the mounting surface relative to the vertical plane shall not exceed 5°.

Technical Parameters

Outline and Installation Dimensions

Installation and Usage Instructions

• 1
  The switch should be installed vertically. The upper terminals should be connected to the power supply, and the lower terminals are for the load output. Pushing the handle upwards connects the circuit (ON) and shows a red indicator; pulling it downwards disconnects the circuit (OFF) and shows a green indicator.
• 2
  Before applying power, operate the switch manually several times. The mechanism action should be flexible, reliable, and without any blockage.
• 3
  The switch is allowed to infrequently make and break load currents (including appropriate overloads) when necessary. However, it must not be used to interrupt short-circuit currents.

Frequently Asked Questions (FAQ)